Hydrofun MS 5300™ Spa (Factory Order)

Hydrofun™ Hot Tubs MS 5300™ Spa
Hydrofun™ Hot Tubs MS 5300™ SpaHydrofun™ Hot Tubs MS 5300™ Spa
Hydrofun™ Hot Tubs MS 5300™ Spa
Our Price: £5,495.00

  • External Size 2133 x 2133 x 864mm
  • Weight: dry / full 335kg / 1651kg
  • Litres 1327
  • Seating capacity / positions 5 / 6
  • 240v / 32 amp or 13 amp Plug 'n' Play
  • Filtration 2 filters
  • 1 backlit waterfall
  • 3 pillows
  • Synthetic cabinet
  • Foam insulation over plumbing
  • Balboa control 4-button panel
  • Interior light LED light
  • Ozonator fitted
  • Drain interior drain
  • 3kW Heater 32amp (1.5kW 13amp)
  • Therapy pumps 1
  • 200 series jets 18 (2 neck jets)
  • 300 series jets 10
  • 400 series jets 2
  • Total jets 30

Click here to view technical specifications and data

Click here to view general questions and answers

Click here to view our Hot Tub Range Owners manual

Configure your own specification of spa (Factory Order 6 to 8 weeks)

The Hydrofun MS 5300™ 32 Spa (2133mm x 2133mm x 864mm)

"With the new float less lounge, the MS 5300™ allows you to settle in and let your imagination carry you away".

With six seating positions the MS 5300™ can accommodate a whole family, the interior cleverly incorporates a lounger and deep seat which are then complemented with 30 stainless steel jets to massage the lower, middle and upper parts of the body, including the neck and the feet.

With Balboa controls fitted as standard for reliability and ease of use, this highly specified spa features individual headrests, interior underwater LED lighting, an Ozonator, a backlit therapeutic waterfall cascade, 1 therapy pump and a thermal spa cover as standard, features that are often only found on more expensive spas or offered as extras by other manufacturers.

The Ozonator uses simple technology to sanitise the water and when used in a Spa alongside chlorine or bromine helps reduce the chemical usage and frequency of water changes, thus saving time & money.

Whilst our entire range of spa's are supplied with a thermal insulated cover and filters, a suitable cover lifter and step is recommended for safety & convenience. It is strongly recommended that a suitable cover lifter is selected early in the planning stages due to obstructions in space like decking and ultimately the visual impact from within the Spa. Please select your accessories from the drop down menus below.

With over 30 years of spa manufacturing experience, our Hot Tubs are built in the USA and shipped to the UK where they are finally prepared for delivery. Our normal factory lead time is between 6 to 8 weeks.

All our Hydrofun MS 5300™ spas are supplied with an attractive Acrylic Shell interior with a durable synthetic cabinet. We offer a total of 20 colour combinations for factory orders, 10 internal Acrylic shell colours complimented by a choice of two external cabinet colours. All design combinations are supplied with a thermal insulation Walnut coloured cover that is apex shaped to allow water to run off. If is also possible to further enhance your spas equipment specification with a built in Audio System, and/or with a “Twilight” LED light system. Please select your colour choices and equipment upgrades from the drop down menus below before proceeding through checkout.

Electrical

The Hydofun MS 5300™ is the latest spa in the range and is new to the UK for 2011. The MS5300™ is available in either standard 32 amp specification or with the 13amp Plug 'n' Play upgrade. The main differences in specification being the Heater rating, all 32amp spas have a 3kW Heater fitted, whilst 13 amp Plug'n'Play spas use a 1.5kW Heater.

All Plug 'n' Play 13 amp Spas can be plugged straight into your 240v wall socket for immediate use without any installation cost or inconvenience. The 32 amp version of this Spa will need to be connected directly to your homes domestic power supply by a qualified electrician, Please select your electrical requirements from the drop down menu below before proceeding through checkout.

Our Hot Tubs are backed with a five-year structural warranty, 2 years surface, 2 years plumbing and equipment and 1 year exterior, components and parts warranty. We believe this cover, along with direct customer access to fully trained engineers at the end of the phone to be one of the best Warranty and Aftersales packages offered within the Spa market in the UK today. 


Cover Lifters

Spa Steps

Hand Rails

Starter Pack

Factory Options

Colour Combinations

Electrical Requirements